Skip to Content

How to Adjust Front & Back Seats in 2 Door Jeep Wrangler?

A Jeep Wrangler 2-door version is best for some off-road adventures. But it’ll give you a hard time when you’re going to fold the backseats of this fantastic car. So, it would be best to learn how a Jeep Wrangler backseat folds down 2 doors.

The backseat folding system varies depending on the type of the folding key. Pull the colored strings outward if your Jeep Wrangler has strings between the backseats.

It’s even easier if the car has buttons. Just press them to fold the seats. Levers are found in many Jeep Wranglers between the seats. You have to release the levers by applying force. Then the seats will fold down.

These three types are the most common. But to know the procedure thoroughly, you’ll need a standard guideline.

Advantages Of Having 2 Door Jeep Wrangler

A 2 door Jeep Wrangler offers plenty of advantages. Here is a list of a few of the benefits of having a 2 door Jeep Wrangler:

  • Better for off-road driving and tracking
  • More affordable
  • Better fuel economy
  • Best for solo camping
  • Helps to take hard turns
  • Same engine as the 4-door version
  • Lightweight car
  • Spacious internal space
  • Same heat maintenance system as a 4-door
  • Parts of these cars are affordable and available

These are just a few of the advantages of a 2 door Jeep Wrangler. You’ll find more of them if you buy one.

How Do You Fold the Backseat of a Jeep Wrangler?

The process of folding the backseat of a Jeep Wrangler depends on the model of the car. The type of the folding key of the backseat is also a major fact. Find out how you can fold the backseat.

1. String Or Strap Type

These colored strings or straps are located between the seats. Pull them in an outward direction to fold down the backseat. Continue the process if you fail to fold them.

2. Button At the Backrests

It is a common type of folding process. Each of the seats got a folding button in the Jeep. You have to push the button to fold the seat.

3. Lever At Seat Level

These levers or buttons are available between the seats or the seat belt clip. Release the lever to fold the backseat. Apply force to release it.

How Much Room Is in The Back of a 2-Door Jeep Wrangler?

A 2-door Jeep Wrangler is not a very big car like the 4-door version. But it’s got enough room for one person. The rear seats are the unsung hero in this situation.

When the rear seats are not folded, you’ll have 12.9 cubic feet or 0.366 cubic meters of space in the back. The back of the car obtains more space when the rear seats are folded. To be exact, it is 31.7 cubic feet or 0.897 cubic meters.

It’s not much space for four people. If you’re camping in the wild, it’s sufficient for your recreation.

Can You Sleep in The Back of a 2-Door Jeep Wrangler?

It is possible to sleep in the back of a 2 door Jeep Wrangler. You just need some tools to make enough space for sleeping.

Materials Required:

You’ll need three central apparatus to set up a sleeping bunk in your Jeep Wrangler.

  1. Foam Mattress Toppers: Use a ventilated and lighter version. If possible, carry two of them.
  2. Turkey Knife: Get the electric version. It’ll give you the right angle and right cut.
  3. Cargo Liner: Buy Jeep cargo liner. They are expensive but last longer.

How To Sleep in The Back of A 2 Door Jeep Wrangler?

Here’s a guideline for sleeping in the back of your 2 door Jeep Wrangler:

Step-01: Move the front seat forward. It’ll give you easy access.

Step-02: Now cut the foam toppers in a dimension that you can fill the gap. Spread it to the back of the driver and passenger seat.

Step-03: Use the turkey knife to cut the armrest cabinet. That’ll give you an extra 6-inch space.

When camping in the cold, remember to use a heater or a generator to keep yourself warm.

How Do You Take the Back Seat Out of A 2-Door Jeep?

Taking the back seat out of a 2-door Jeep Wrangler offers more space for camping equipment.

You’ll also have enough room for maintenance tools. Here is an overview of taking the back seats out of a 2-door Jeep Wrangler.

Step-1: Move the Front Seats

Before you move your back seats, you must move the front seats. Push them forward as far as you can.

Pushing the front seats will provide you with more space to work on the back seats. It’ll be effortless to unbolt the floorboard bolts of the backseat.

Step-2: Remove the Bolts of The Wrangler Back Seat

Four bolts keep the back seat in the correct position. Use a socket wrench to separate the bolts from the back seat. Save the front bolts with mounting brackets for further use.

Step-3: Remove the Back Seat

Please pick up the back seat and carry it outside once you’ve removed the bolts. You’ll need a helper to remove the seat from their positions.

If you own a newer model of a 2 door Jeep Wrangler, slide the seats out of the car. Don’t forget to remove the bolts!


Folding the backseats of a Jeep Wrangler is very elementary. Follow these guidelines and the provided manual to fold them carefully.

But removing the seats is a tough job. It’ll cost you a hefty sum if you mess up.

We hope the article on the Jeep Wrangler backseat fold down 2 doors has given you a better idea about folding your Jeep Wrangler’s back seats.

Use the proper tools and ask for help if you face any problems. Hope you have the best off-road adventure with your 2 door Jeep Wrangler!

Related Posts: