Skip to Content

Pair and Connect Phone on Jeep Compass via Bluetooth: Step-by-Step

Ever think of how to pair phone Jeep Compass? The Uconnect System is unique to the Jeep Compass, but like with any technology, you may sometimes experience connectivity troubles.

You can connect your phone to your Jeep Compass by simply turning on Bluetooth and tapping on your Jeep Compass model in the available device tab. But it can be tricky at times.

In this article, I am going to tell you how to pair your smartphone to your Jeep Compass, what to do when you are having a connection issue, and every other thing that you may need to know.

How to Connect Your Smartphone Phone to Bluetooth Connection on Jeep Compass?

The procedure of connecting your smartphone to your Jeep Compass via Bluetooth is not complicated.

Follow these steps to pair phone Jeep Compass:

  1. Make sure your mobile device’s Bluetooth is turned on and the car is stopped or parked.
  2. Press the Phone button on your Jeep Compass Uconnect screen > Add Device > Settings. Your mobile device can now find the system, which may show a unique PIN.
  3. Select your Jeep Compass from the Bluetooth menu on your mobile device. The two will now begin connecting, and the pairing request will be confirmed on your Jeep Uconnect screen.
  4. Bluetooth has been established between your mobile device and the Jeep Compass Uconnect multimedia system.

Why Your Phone May Not Be Connecting to the Jeep Compass?

When your Jeep Compass Bluetooth connectivity fails, the first thing that comes to mind is the bother of phoning Uconnect or Jeep customer support. What’s even scarier is having to take the equipment to a service facility in case the problem isn’t remedied.

Look at the following typical difficulties and effective remedies before you start panicking and making calls. They could just save you time.

Disconnection, even after you’ve properly linked the two devices, is one of the most prevalent difficulties with Bluetooth in general. There are a variety of reasons why this occurs, including:

1. Presence of interference:

Many analog and digital sounds pervade our lives nowadays, and even if they don’t transfer wirelessly, they can bleed over and create interference. This is especially true because Bluetooth operates in the unlicensed radio range.

The following are some of the most typical reasons of Bluetooth connection issues:

  • USB 3.0 and WiFi
  • 2.4GHz Electronic Devices

2. Low Phone Battery:

Your device and infotainment system work together to help you get the most out of your Jeep Compass Uconnect system thanks to Bluetooth technology.

Bluetooth, like data, can deplete your device’s battery more quickly than usual. This is especially true when streaming music from your smartphone to your vehicle’s infotainment system.

When your phone detects that it is running out of battery life, it will usually go into power-saving mode. This is especially true with newer smartphone models.

Bluetooth normally turns off automatically in this mode to preserve power for more vital functions.

3. Distance and Obstruction:

It’s important to remember that Bluetooth only works if you’re close to it. To be able to find each other, the linked devices must be within 30 feet of each other.

However, in the presence of barriers, the practical distance drops, so keep that in mind.

What to Do When Your Phone Doesn’t Connect to the Jeep Compass?

Another issue you may run into is your Jeep Compass failing to recognize or connect to the other device.

It’s possible that you’ll have trouble pairing the two devices at the same time. The following are some options for resolving the problem:

1. Set to “Discoverable”:

Most of the time, your smartphone and jeep Compass are unable to detect each other because one or both of the devices’ Bluetooth settings are not set to “Discoverable”.

Simply go to your phone’s or Uconnect’s Bluetooth settings and change it to Discoverable to solve the problem. Wait a few moments for the other device to detect the device that is in Discoverable mode. If that’s the case, get pairing!

2. Clear Bluetooth History:

Most of the time, you connect your gadget’s Bluetooth to other Bluetooth-enabled devices, just as you do with your browser and WiFi network history.

As a result of “information overload,” your device may be unable to identify Uconnect’s Bluetooth.

Clearing or deleting your Bluetooth pairing history, including Uconnect, is a simple solution. After that, attempt to connect the two units.

Here’s how to link your device to your Jeep Compass Uconnect system for your convenience:

  • Switch on your smartphone and put your Jeep Compass in “Park” mode.
  • Activate Bluetooth on your gadget and car.
  • Find and press the “Phone” image on your Uconnect screen, and then select “Yes.”
  • On your gadget’s settings or options, go to Bluetooth and check if it recognizes Uconnect or Compass. Press it to pair.
  • Your Compass Uconnect screen will flash four digits, which will serve as a pairing PIN.
  • Enter the provided PIN on your gadget and wait for them to pair successfully.
  • If you succeeded, it is best to list your phone or gadget as a favorite so that Uconnect recognizes it quickly once you switch the Bluetooth on.

3. Restart Your gadget:

Most problems with pairing or non-recognition can be resolved by just restarting your device. Wait a few moments after restarting your device before going to Bluetooth settings. Then link it to your Uconnect.

4. Soft Reset UConnect:

It’s possible that your Jeep’s Uconnect system hasn’t been updated, causing Bluetooth communication troubles. Soft resetting will aid in the system’s speedy updating.

Switch on both your car (in “Park” mode) and your infotainment system while sitting comfortably on your Jeep Compass water-resistant seat cover (Check Amazon for Price).

To turn off your infotainment screen, press and hold the upper rightmost corner of the screen until it turns off. This takes between 10 to 17 seconds on average.

Remove your finger from the screen once it has turned off and wait for the Jeep logo to display and then disappear.

The Uconnect logo should display next, and it should state “Subscription Updating” and take you back to where you were before the reset. Then, try connecting the two devices again.

5. Hard Reset UConnect:

Just a heads up: hard resetting your Uconnect will restore all factory settings, which means that saved data like navigation, pairing, and other personal settings will be lost, and you’ll have to configure them all over again. If you don’t think it will be an issue, you can proceed with this approach by following these steps:

  • While your car is in run mode, press and hold the cold and hot buttons at the same time for about three or four seconds or until the “Engineering Menu,” where you can find several resetting options, appears.
  • Scroll through the options and locate and press “Restart to Factory Default,” and then press Yes.
  • You can start setting everything up again as if you have a new Uconnect System.

Final Words

If you have made it this far of the article, you already know everything there is to know about how to pair phone Jeep Compass, related issues, and how to solve them.

If the methods for how to solve Jeep Compass Bluetooth difficulties don’t work, it’s time to contact Jeep or Uconnect customer support because the issue might be with the device itself.

Related Posts: