Skip to Content

Do Jeep Wranglers Have Blind Spot Mirror? (Answered)

Blindspot mirrors are an exceptional item when it comes to safety. Aside from increasing the driver’s vision range they are also a decent deterrent against lane changing crashes. With that in mind, do Jeep Wranglers have blind spot mirrors?

Yes, Wranglers did come up with the option of adding blind mirror spots. It comes in the form of a small, compact, and circular mirror stuck to the passenger side mirror. This mirror mainly served the purpose of safety. 

So want to know more about Jeep Wranglers and their blind spot mirrors? Well, you are in the right place to do so. Scroll down below and keep on reading!

What Is A Jeep Wrangler Blind Spot Mirror?

The blind post mirror in Jeep Wranglers refers to a small circular mirror that has been fixed to the side mirror at the front of the Jeep. This is typically positioned on the passenger side. 

Older Wrangler models had more vehicles equipped with blind spot mirrors. This is because before the newest models were made, the Jeep Wrangler wasn’t quite safe. 

Most people made use of this blind post mirror as a safety measure against any potential accidents. Alternatively, they were also used to increase the driver’s accuracy by providing more sight range.

Do Jeep Wranglers Have Blind Spot Mirror? 

Yes, Jeep Wranglers do have blind spot mirrors built into their passenger side mirror. However, this mirror doesn’t usually come with the car as you buy it. 

What the manufacturers allow you to do is to install the blind spot mirror as an auxiliary item.  While it does cost some money, the price is totally worth the value. After all, there is no compromise when it comes to life.

While the blind spot mirror was more prominent in earlier generations, many people still tend to use it in newer models of the Wrangler. Despite it being an old piece of technology, none can deny its reliability. 

Which Jeep Models Have Blind Spot Monitoring?

Not all Jeep models offered blind spot monitoring. Depending on the unit specs and price, only a few models offered this feature. We have compiled and listed some of the most common ones so that you can take a glance at them. 

Jeep Cherokee

The Jeep Cherokee featured an extremely reliable blind spot monitoring system. This feature was designed to help the driver by warning them when an object or figure was approaching them from their blind spot. 

In addition, it also helped in identifying when exactly would be the safest time to change lanes.

The monitoring system made use of several sensors and a rear camera connected via an intricate circuit system. Many newer monitoring systems also work together with the ABS to provide a safer driving environment. 

Jeep Renegade

While it is the 2021 version that is known for this feature, the Renegade started to house blind post monitoring after 2018. 

The blind spot monitoring works together with the rear cross path detection to complete its task. This allows the sensors to detect any approaching vehicles in your blind spot on a huge range. 

This is incredibly beneficial when you are driving on a busy road. In addition, it can also be a huge convenience when you’re trying to park between two cars while not crashing. 

Jeep Gladiator

The gladiator is not designed to be like your average SUV. Instead, it has the form factor of a typical truck that comes with all the additional driving features that any truck driver would want. 

Having a Blind Spot Monitoring (BSM) system isn’t an exception either. The gladiator makes use of its radar sensors to detect any vehicle that is approaching the car from its rear. 

While it is useful to prevent any possible accidents, there is a design flaw in the mechanism used in the gladiator. This fault makes the detection range of the truck to be lower than most other Jeeps. 

Jeep Wrangler

The last entry on our list is the newest Jeep Wranglers that have been manufactured since 2022. 

We include only the ones manufactured in 2022 because the past versions didn’t really have an automated blind spot monitoring mechanism. Instead, people used to use blind spot mirrors. 

Newer Wranglers use radar sensors to monitor vehicles that come within a range of their rear, where the blindspot sensors are located. Once the subject is detected, signals are sent to the driver. 

How Do You Turn On Blind Spot Monitoring On A Jeep?

Most Jeep models have the same trigger for activating the blindspot mechanism. We have listed two of the most common waste that you can activate the blind spot mechanism. 

Be warned, though, that for the procedure to work, your Jeep must have the required sensors and programs. 

Method 1: Using Infotainment System

The infotainment is the easiest to use in performing any task over your Jeep. You can also control the blind spot monitors via this system. 

You can use the following step-by-step procedure to activate the blindspot monitoring system in your Jeep. 

Step 1: Enter settings

Look through the touch screen of the infotainment and tap on the settings once you have found it. 

Step 2: Enter Drive Assistance

Scroll through settings till you find the drive assistance options. Tap on the option, and a drop-down menu will pop out. 

Step 3: Enable Blind Spot Monitoring

Once the drop-down menu appears, you will be able to activate the blind spot monitoring system easily.  Use the same procedure and option in the scenario where you want to deactivate the system. 

Method 2: Manual Activation

Don’t start worrying if you do not have smooth-running infotainment. While turning it on manually isn’t as easy as the other procedure, it is still a reliable option. 

Step 1: Press Direction Arrows On Steering Wheel

If you look well enough, you should find out the up and down direction arrows that are present on your steering wheels. Press on these buttons simultaneously. 

Step 2: Click on the Side Mirror Button

Once you are done with the direction buttons, click on the button that is located on the side mirror of your Jeep. Once this is done, the system will start working without any problem. 

Is Blind-Spot Monitoring Worth It?

Yes, BSM or Blindspot monitoring is definitely worth all the hype. Statistical data shows that more than 10 percent of all accidents are caused while changing lanes. 

BSM is typically used while changing lawns to prevent any crashes that could occur from the blind side of the automobile. If the BSM system is utilized, the probability of such unwanted accidents can further decrease.  

So even if your vehicle doesn’t come with a preinstalled BSM, you should definitely go the extra mile and install the sensors and circuits. Who knows, they might end up saving your life someday. 


Now that we are at the end of this article, you might have several questions to ask. While it is impossible to answer all of them, we will try our best to give solutions to a few. 

How Much Does It Cost To Add Blindspot Monitoring?

Typical blindspot monitoring systems cause about 200 to 300 USD if you are going to install them externally. In addition, if you are going to patch up park and lane assist systems, the total might set you back by 1400 USD. 

When Was The Fully-Digital BSM Comes Out?

It was in 2005 when the first BSM and all of its variations came out. Before, it was more appropriate to use the blindspot mirrors only with your vehicle. 

Do All Cars Have Blindspot Detections Build-in?

No, only a few models of heavy-use cars typically come with a pre-installed blindspot detector. Most users tend to buy these detectors externally and set them up after sales. 

Is Forward Collision Warning Worth It?

Just like rear collisions, there is a huge chunk of percentage of accidents caused by forward collisions. As such, it is highly advisable that you buy the sensors needed for the system to avoid any potential accidents. 

Can You Turn Off Blindspot Monitering?

Although we would advise you against this, you can indeed turn off your blindspot monitoring system. This is quite easy as all you need to do is enter settings via the infotainment screen and then deactivate it via driver’s assistance.


Blind spot cameras and monitors are highly dependent on sensors and lenses. These components, if left active at all times, can show signs of damage quite easily.

We advise you to wipe off your cameras and run regular maintenance to make sure that the system works perfectly. In addition, you should also know your Jeep’s limitations and not install components exceeding that. 

As long as you are willing to follow these tips, your Jeep will be rewarded with a highly functional BSM. Not only will your drivability be improved, but you also will not have to worry about safety either.   

Related Posts: