Skip to Content

How to Fix a Tear in a Jeep Soft Top? Detailed Guide!

A rip in a Jeep soft top does not necessitate a pricey repair or replacement. When driving in the rain, a ripped soft top may be more than an annoyance. It can induce driver distraction, posing a safety risk in addition to being unappealing to look at.

A Jeep soft top repair is a straightforward job that can be completed at home with the correct tools and a little spare time.

In this article, I am going to discuss everything about ragtop, what causes it to damage, and how to fix it.

What Causes a Jeep Soft Top to Tear?

Several causes can cause damage to the Soft Top. The elements, as well as other factors, can make life difficult for the top. Here are a few very hazardous items.


Low-hanging or falling branches might harm the top of your vehicle if you park it beneath a tree to keep it cool during the hot summer months.

To minimize damage to the tops of trees, park under well-kept, clipped trees.


Because a ragtop is permeable, dirt can sink in and cause damage to the lid.

With regular cleaning and sealants, you can avoid dirt from settling into your top and permanently ruining it.

Road Debris:

Grime and soil kicked up by large rig wheels are among the road debris. Rocks thrown into the air by big rig wheels might harm your soft top if they bounce off of it.

Maintaining and sealing your top regularly, much like dirt, is your greatest line of defense against road filth and oil. This won’t prevent rock damage to the front of your roof if it strikes it just right, but it will help keep oil and other debris off of it.


The effects of inclement weather on your ragtop might be disastrous. But first, let’s speak about soft tops.

Rain and humidity, like dirt, sink into the pores. They cause jeep soft top cracks, creating the ideal habitat for mold and mildew to thrive.

Always clean the jeep soft top. follow the manufacturer’s directions for protecting your leather or fake leather top from moisture and bad weather.

How to Fix a Tear in a Jeep Soft Top?

There are a couple of ways to of a Jeep soft top repair. The options are sewing and patching.

1. Sewing

Step 1- Let the area surrounding the tear dry after cleaning it with a moist clean towel.

On the rear side of the soft top, apply a piece of aluminum waterproofing tape with a black tar backing.

Hold the rip in place, and simultaneously, firmly push the tape on.

Paint over the tape with latex paint that matches the soft top’s inside, and it will appear as if the tear never existed.

Step 2- Sew the tear back together using a very strong nylon thread using a leather needle or another sort of extremely strong needle. These may be found in a fabric store.

Double over the thread and hold the parts together. Inside the top, apply seam sealant to the exposed threads.

Seam sealer is available at your local camping shop. This will assist in protecting the thread from the elements.

Step 3- E600 Glue a piece of old fabric to the interior region of the tear, preferably cloth from an old soft top or an old bikini top.

On all sides, make sure the material is at least an inch larger than the tear.

Step 4- Apply an iron patch on the soft top, but be cautious if you use it on the outside. This procedure should be done with caution since the material around the rip may melt.

2. Patching

Step 1- To begin, park your car in a garage away from direct sunshine. Remove any surface dust from the area surrounding the rip, both inside and out, and make sure it is thoroughly dry.

Step 2- You’re all ready to build your patch now. Cut a round or oval shape out of the canvas large enough to cover the hole.

Place your patch over the hole on the interior of the top and softly sketch an outline a little smaller than the patch, indicating where it will be glued later.

Step 3- Place the patch on top of your work surface. Apply an even application of glue to one side of the patch as well as the area you marked on the top’s inside. Allow 10 minutes for the repair and top to dry fully.

Step 4- Apply glue to the same side of the patch as well as the marked area on the interior of the top.

Wait until the areas are somewhat sticky but not wet before proceeding.

When the patch slides off your finger without leaving any residue, it’s ready.

Place your patch over the marked region on the interior and align the two sides of the top cloth along the rip line.

Step 5- Apply pressure to the internal patch as well as the equivalent outer region until they are completely dry. Your shirt is now waterproof and has regained its integrity.

Follow-up step for vinyl tops: Make the patch almost undetectable and much more watertight.

A silicone sealant in the same color as your top, a caulk gun, spray glass cleaner, and a rubber squeegee is all required.

Fill your caulk gun halfway with sealant and apply a thin, uniform line of sealant to the original rip line on the soft top’s exterior.

Follow-up step for cloth tops of various materials: To begin, repeat the instructions given for vinyl tops.

Create a pile of short-cut fibers by edge trimming a portion of your canvas or Stayfast top material.

Apply a little additional sealant just at the outside glued repair seam with a modeler’s paintbrush obtained from a craft or paint store, then insert your cut material “loose ends” to further camouflage the repair.

A carefully put bead of silicone clear adhesive sealer, followed by the fibers, can also be used.

Step 7- Spray the entire surface with glass cleaner and use a squeegee to remove any excess.

Allow for 24 hours of drying time with the top-up.

How Can You Protect Your Jeep Soft Top From Tearing?

Because the top of your Jeep Wrangler protects you and your family while traveling, it’s critical to keep it in good repair. Cleaning a Jeep Wrangler with a soft top is similar to cleaning the rest of the car.

Cleaning Your Top:

Your soft top is comprised of a multi-ply, heavy-duty fabric that efficiently suppresses outside noise and protects passengers from the weather.

Despite its robust composition, this material should be handled with caution during the cleaning process to avoid rips and tears.

Storing Your Cabriolet Wrangler:

To extend the life of your car, it’s critical to keep it out of harsh environments.

High-stress conditions, such as sweltering heat and heavy rain, accelerate the wear and tear on the soft top, requiring you to replace it sooner than you may imagine.

When feasible, park your Jeep Wrangler in a garage to protect it from the weather and maintain the top.

Waterproofing Your Wrangler:

Waterproofing is a means of keeping your soft top hood in good working order.

Making sure it’s ready to tackle unpredictable weather patterns now can save you a lot of headaches later on when it comes to caring for your hood.

When compared to the hundreds, if not thousands, of dollars you’ll save, it’s quite simple to execute and inexpensive to implement.

  • Mask the edges of your soft top with tape
  • Spray on a canvas or vinyl hydroponic solution (depending on the specific material of your soft top)


Your Jeep Wrangler’s soft top is essential for both appearance and practicality. So, a jeep soft top repair is an emergency. Keeping it clean and well-maintained will ensure that your car is as useful as possible in any situation.

It’s easy to do and takes little time, but mismanaging your soft top might have major ramifications down the line. In addition to following all of the other instructions in this article, remember to wash your hood every 1-2 months!

Related Posts: