Skip to Content

How To Add Coolant On Jeep Liberty: Type & Capacity?

Coolant is a liquid or gas component that is used to maintain the temperature of your engine in cars. But a Jeep Liberty coolant is not like many other coolant you know. Moreover, the capacity of the Jeep Liberty coolant is also not the same.  

To add coolant to your Jeep Liberty, open your hood, find the reservoir, check the current coolant level, add coolant, and replace the cap.

Interestingly enough, you’ve probably heard of ethylene glycol before because it’s the main element in the well-known word “antifreeze.” Keep in mind that you should never pour antifreeze or water into your engine system on its own. To make the polite antifreeze, they must be mixed.

In this article, I am going to tell you everything you need to know about coolant and how to add it to your Jeep Liberty.

How Much Coolant Does a Jeep Liberty Hold?

A Jeep Liberty has a 14-quart coolant capacity. Engine antifreeze loses its anticorrosive and lubricating characteristics over time.

Your Jeep Liberty radiator coolant can also cause radiator corrosion, resulting in rust in Your car’s radiator or engine, which you don’t want.

Does It Matter What Brand of Coolant You Use?

It is important to choose the right antifreeze for your Jeep Liberty. When choosing the right coolant and antifreeze, there are a few things to keep in mind.

While one brand may have a higher rating than another, the best brand is always a matter of personal opinion and who you consult for advice. There are, however, additional factors to consider in addition to the brand name.

Choose the right type

Keep in mind that coolant/antifreeze comes in a variety of forms. Different technologies are used in the various kinds’ formulations. The type of antifreeze you use depends a lot on the type of engine you have and how old it is.

Using the incorrect coolant might cause a slew of issues with your cooling system down the road. To find out what sort of antifreeze is necessary for your model and engine type, see your vehicle’s maintenance manual.

Concentrated or not?

The last item to think about is whether you want to use a concentrated or diluted antifreeze.

When it comes to a concentrated recipe, you’ll need to dilute it using half the solution and half the water. You won’t want to mix a pre-mixed antifreeze with water if you buy it that way.

Don’t change coolant types

The general rule of thumb among mechanics is to avoid changing the coolant type that your car was built with.

Using multiple types of antifreeze in your cooling system might cause problems and make it harder to change and clean.

Engines were designed to run on a certain type of coolant, so it’s always better to follow the manufacturer’s recommendations.

What color is Jeep antifreeze?

OAT coolant is required for Jeeps from 2013 to 2020. This sort of coolant comes in a variety of hues, including orange, bright red, red, blue, and even dark green.

HOAT coolant was required in Jeeps before to 2013. Yellow, turquoise, pink, blue, or purple are some of the colors available for this type of coolant.

One thing to remember is that you should never mix the two. Your engine will get a sludgy brown hue, which is not ideal.

Can You Change Your Coolant by Yourself & How To?

Even if you aren’t a skilled mechanic, changing your own Jeep Liberty coolant is a reasonable choice.

If you are familiar with a car and have all of the essential equipment, replacing it yourself is a viable option. The fundamental stages are as follows:

  • Step- 1: Make sure your car is parked on a level surface. If you unintentionally spill some of the liquids, use a hard surface with cloths nearby.
  • Step- 2: Check to see whether your engine is cool. Allow enough time for the engine to cool if you’ve just transferred it to a better working surface. Allow between 30 and 45 minutes for it to rest.
  • Step- 3: The automobile should be jacked up. You’ll need enough room below it to move around comfortably. For your safety, make sure the jack is fastened in all of the appropriate places. It’s also a good idea to have someone with you in case you need help.
  • Step- 4: Make sure your eyes and hands are protected. Safety goggles and gloves should be used at all times. To guarantee that they are secure, they should both fit snugly.
  • Step- 5: Place your radiator drain pan beneath the drain valve on the radiator. The owner’s handbook for your Jeep will aid you in determining where this is.
  • Step- 6: Using your hand, a wrench, or a screwdriver, open the drain valve. Before you can open the valve, you may need to remove a drain cock on some automobiles. Remove this first if necessary. Make sure it’s in a location where you won’t lose it.
  • Step- 7: Allow the coolant to completely drain. Depending on how large or small your cooling system is, this procedure may be rapid or take some time. The antifreeze will keep flowing until it has been completely removed.
  • Step- 8: Place the old coolant in a container for disposal.
  • Step- 9: Using the screwdriver or wrench, close the drain valve. Tighten the clasp. The radiator will leak if it is not tight enough.
  • Step- 10: Ensure that the radiators have been flushed.
  • Step- 11: Now it’s time to add your coolant. If you’ve chosen to utilize a concentrated formula, make sure to dilute it by mixing it with water.
  • Step- 12: If your car is new enough to require it, air-bleed prevents air pockets from accumulating and causing difficulties later.

What Is the Cost of Putting or Replacing the Coolant?

The cost of a antifreeze or antifreeze replacement in Jeep Liberty is determined by the vehicle’s type, size, coolant type, antifreeze capacity, and geographical location.

A typical antifreeze change will cost you between $100 and $200 on average.

How To Know the Coolant Needs to Be Replaced?

The primary purpose of an engine’s cooling system is to remove any heat generated by your engine during the combustion process.

Your engine would quickly overheat if the cooling system and essential antifreeze were not there, and various components would suffer heat damage.

These are the possible signs of a antifreeze replacement:

  • If your car’s engine is becoming considerably hotter, it may be time to replace the coolant.
  • The “low antifreeze level” indicator, which is usually positioned on your vehicle’s dash, will alert you if your antifreeze level is decreasing lower than it should be. Replace the coolant in the engine.
  • When you smell a pleasant odor coming from your car’s engine, it’s a sign that you could have a antifreeze leak.
  • The interior air conditioning system stops working

How Can You Make Your Engine Run Cooler?

You may perform several minor things to help your engine run cooler. The first important thing to check is that your vehicle’s grill is free of any debris or other impediments.

Although having grill décor is attractive, especially on an off-roading Jeep, it will do little to keep your engine free of debris.

Other options include flushing your radiator with various items. Radiator Flush & Fill, for example, will dissolve calcified deposits and improve the efficiency of your vehicle’s cooling system.

You might also use WetWater as an addition. This is a coolant additive that can help lower temperatures by up to 30 degrees.

Keeping your vehicle’s maintenance up to date is perhaps the easiest thing you can do to keep your engine operating cooler. To keep your Jeep Liberty’s engine from overheating, make sure it’s always tuned up and running effectively.

Final Words

Knowing the distinct Jeep Liberty coolant and obtaining a suggestion is critical in making a final selection. Keeping your Jeep Liberty well-maintained and the fluids at the right level will ensure that it operates at a comfortable temperature.

Related Posts: