How To Change the Headlight Bulb in the Jeep Compass? & Cost

If you’ve owned a Jeep Compass for a long time, you’ve probably experienced headlight problems. The headlight is dimming or there is a flickering issue.

Isn’t it true that if these occur, you’ll have to replace your headlight? What do you think would help? Do you know how to change the headlights on a Jeep Compass?

If not, then this article is for you.

In most current automobiles, replacing just the bulbs is more cost-effective than replacing the entire headlight.

In this article, I’ll explain why you should change the headlight bulb on your Jeep Compass and how you can do it.

Key Points:

  • Headlight bulbs do not last forever; they become damaged, malfunction, or simply quit operating overtime.
  • Labour prices for repairing a Jeep Compass headlight bulb are likely to range from $75 to $95, with parts costing between $127 and $170.
  • Upgrade your headlights to LEDs, which provide a significant improvement in road illumination and improved nighttime safety.

Why Do Jeep Compass Headlight Bulbs Need Replacing?

At night, your Jeep Compass’s headlights are the primary source of illumination, allowing you to see where you’re going and, more critically, allowing drivers to see other vehicles approaching them.

It is more cost-effective to replace just the bulbs rather than the entire headlight in most modern vehicles.

At the front of most Jeep Compass, there are four headlight bulbs – two for low beams and two for high beams/dip lights as well as separate fuses and relays for each side.

Replacing a headlight bulb can cost anywhere from $20 to $100 or more, depending on whether the entire headlamp assembly needs to be replaced.

Bulbs, like most things, do not stay indefinitely; after time, they are damaged, malfunction, or just stop working.

How Can You Determine If Your Headlights Need to Be Replaced?

The use of car headlights is required for safe driving. That’s why knowing the symptoms that your car’s headlights need to be replaced is important.

Dim Headlights

After a while, headlights lose their luster, so if you find yours are dimmer than before, it’s a sign they’re nearing the end of their useful life and will soon burn out.

Flickered Headlights

It’s possible that your headlights aren’t burned out. They could be flickering as a result of a faulty electrical connection or another internal problem. Flickering headlights should be checked by a professional in either case.

Hazy Headlights

Salt, debris, and even UV radiation can cause automobile headlights to yellow or become blurry. Fortunately, this is a simple fix: cloudy headlights can easily be cleaned by washing the headlight cover with a specific cleaner designed for this purpose.

Occasionally, the headlamp must be replaced. In any case, hazy headlights should be examined by a mechanic who is familiar with automobile maintenance.

Dead Headlights

This is the most obvious sign that your headlights need to be replaced. Replace both while you’re at it, not only because the other will most likely burn out soon, but also because you want to ensure that your headlights provide consistent, not lopsided, illumination at night.

Jeep Compass Headlight Assembly Replacement Guide:

Given the Jeep Compass’s adventurous nature and construction, I’ve created a Jeep compass headlight component replacement guide to assist you in maintaining the vehicle’s headlights.

Step 01

The low-beam bulb will be our first emphasis. The low-beam bulb of the Jeep Compass is situated right about the center of the headlight casing.

Step 02

When you look at the electric connector, you’ll discover that the bulb is held in place with clippers. After removing the clippers, simply turn the tool 1/4 counter clockwise to remove the bulb completely.

Step 03

The high-beam bulb is situated next to the turn signal on the inside edge of the headlight casing.

The same procedure as for the low-beam bulb must be used to access the high-beam bulb. Gently push the clips apart this time, as a few clips hold the entire high-beam bulb in place.

Before retaining the clips, you must first disconnect the power plug. Even in the event of a malfunction, the bulb’s electrical pathway will not be disturbed any manner.

Step 04

Eventually, the indication bulbs are the only bulbs remaining to deal with. On both sides of the headlight main panel, there are indication bulbs. The same 1/4 counter clockwise turn is required to effectively replace them.

Step 05

Also, make sure that the replacement bulb or headlight panel is constantly visible. To do so, avoid holding the bulb or panel parts with filthy hands. If your hands are filthy, consider cleaning them with high-quality alcohol wipes.

Jeep Compass Headlight Bulb Replacement Costs

The estimated cost of replacing a Jeep Compass headlight bulb. Labor costs are expected to be between $75 and $95, with parts costing between $127 and $170. The number and age of Jeep Compasses on the road are used to determine this range.

How to Convert Your Headlight Bulbs to LED

The main benefit of LED headlights is that they provide a significant boost in road illumination, resulting in increased safety when driving at night.

To convert your headlight bulbs to LED you need to follow the following steps:

1. Find Your Headlight Bulb Type

It can be of two types.

1) Single Beam Bulb – There are two distinct bulbs for the high and low beams.

2) Dual Beam Bulb – a single bulb with both high and low beams.

2. Purchase an LED Conversion Kit

These are available from several internet retailers. You may use PayPal, MasterCard, American Express, and so on.

3. Unboxing Your LED Conversion Kit

Check that you have all of the necessary components when you receive your LED headlight kit. Two LED lights, two ballasts, and wire should all be included.

4. Take Some Photos

Before you install the LED headlights, take some images of your halogen headlights so you can compare the two.

5. Locate Your Headlight Bulbs

To begin, make certain that your vehicle is properly secured. The engine is turned off, the keys are removed from the ignition, and the parking brake is activated.

Locate your headlight bulbs by opening the hood. Then remove the light bulb’s plastic electrical connector.

6. Remove Your Halogen Bulbs

Depending on the bulb type, you may need to remove a metal clip first before twisting anti-clockwise and pulling out the bulb.

Keep your halogen lights in a secure location. You could require them in the future.

7. Install the LED Bulbs

Install the LED bulbs into the headlight socket, taking care not to contact the LED with your bare hands.

To fix the bulb, gently turn it clockwise.

8. Connect the LED Ballast

Connect the wire for the LED ballast. The new bulb is connected to one end, while the original wire harness is connected to the other.

9. Check the Cut Off

Check the position of the cutoff with your headlights turned on.

You may need to alter the headlight position if you don’t want to blind other drivers with your dazzling new lights. The headlight alignment screws can be adjusted to do this. For more information, consult the owner’s manual.

10. Secure the Ballasts

Use double-sided tape or plastic zip ties to secure the ballasts.

Keep the ballasts away from extreme heat, vibration, and moisture if possible. Mine is attached to the back of the headlight housing.

Final Words

Hope you find this instruction to replace the Jeep compass headlight assembly useful. According to vehicle experts, such a skill could be beneficial.

You never know when you’ll need to replace bulbs in your car headlights, especially if there isn’t a repair within miles and you’ve never dealt with them before. You could have some ideas for updating your headlights to LEDs, which provide a considerable improvement in road illumination and enhanced safety when driving at night.

Related Posts: