Skip to Content

How to Install an Alpine ILX-W650 in a Jeep Wrangler JK?

So, you want to replace your old multimedia receiver of the jeep wrangler jk with a new Alpine ILX-W650. Well, it is one of the perfect decisions because this device is one of the best in its field. Now, the question arises of how you can install it without any help?

Well, installing Alpine ILX-W650 in your jeep wrangler jk is comparatively easy if you have a proper set of tools and a bit of technical knowledge. All you need to do is to remove the old one and replace the new one properly.

Now, if you are wondering about the proper way of installation, then you have to read this article carefully. Down below, we have compiled everything you need to install the device all by yourself. So, keep reading!

What Can You Do With Alpine Ilx W650 On Jeep Wrangler?

This receiver device for your Jeep Wrangler can open new ways of entertainment for you, and you can use it in a variety of ways. We will look at all of this down below.

1. Integrated with your Android and Apple CarPlay

Apple CarPlay and Android Auto are entirely integrated with the Alpine ILX-W650 to offer the IOS or Android experience right into your Jeep Wrangler.

The built-in buttons on the ILX W650 may be used to operate a variety of applications. As a result, you can effortlessly manage applications like Radio and Spotify when driving, allowing you to listen to all of your favorite tracks without fiddling with your cell phone.

2. Simple Control

The ‘Simple Swipe’ function on this audio system is one of its main characteristics. It makes controlling your music easier while driving on rugged terrains. With two fingers to scroll vertically, downwards, or sideways, you may adjust sound and shuffle songs with just a swipe of fingers.

3. Better Sound Quality

Alpine is recognized for generating higher audio equipment, and the ILX W650 is no exception. It has a high-resolution music playing option and supports a variety of formats like MP3, WMA, and many more. 

Moreover, you have the full option to customize the sound playing options according to your taste. Thus, the music listening experience will always be a step above this product.

4. Backup Camera Access

With the Alpine ILX W650, you can add a front or camera on the back to your Jeep Wrangler and set the viewing angles from your display. With the two cam connections, you’ll be able to see your drive on this clear monitor. It also includes a built-in rear cam range guidance screen, which eliminates blind spots.

5. Complete Control on Steering Wheel

What Alpine did was bring versatility to this product. It is designed to be versatile and work with almost all steering wheels which means you can control the whole audio system through your steering wheels. 

So, you do not have to pause while driving to change your music or anything. You can simply push buttons on the steering wheel and control it.

How To Install A Alpine Ilx-W650 In A Jeep Wrangler Jk?

By now, we already know how versatile and useful this audio receiver is But, the main question is how to install it in Wrangler Jk. Installing this audio system is pretty straightforward, and you can easily do it by following our step-by-step guide below.

Step 1: Collecting required equipment 

You do not want to be running around to look for equipment, adapters, and cables in the middle of your installation process. So the primary thing you need to do is gather all necessary cables, adapters, and everything else like small screwdrivers, wire cutters, and torchlight before you start with the setup procedure.

For wiring, you can use the PAC PR4-CH11, which is available for around $80-$90. You should also get a Metra 95-511 Dash kit to screw it down.

Step 2:  Removing the old device

Since you will be installing the Alpine ILX-W650 receiver, you will need to remove your old stereo system from the Jeep Wrangler. The process can be a bit different depending on your model of the Wrangler. 

But, you will need to be very careful while removing the old system as you do not want to cause any damage to your interior or exterior wirings. Get a screwdriver and push out the stock stereo system. Also, make sure that the battery terminals are disconnected.

Step 3: Establish proper connection

This is the most crucial step in the whole installation procedure. You will need to be very careful while doing this, as wrong connections can damage your Alpine ILX-W650. 

The procedure is rather simple; see the YouTube video for further information. Attach every wire to different outlets on your Wrangler’s sound system and plug them also onto the Alpine. After everything is linked, you may reattach the dash and stock audio.

Step 4: Finalize the installation

You are now done installing the Alpine ILX-W650 on your Jeep Wrangler. Start the system and check if everything is working fine. Adjust all the settings according to your preference for a smooth running experience.

Does Alpine Ilx W650 Have Steering Wheel Controls?

This audio receiver does allow steering wheel controls with it. Thus, users can easily control the whole system from the steering wheels without even physically touching the screen or buttons directly while driving. 

Even though it works with the majority of steering wheels available in the market, however, if your steering wheel isn’t compatible, you may purchase an idatalink maestro add-on module.

How Much Does It Cost To Install Alpine Ilx W650 On Jeep Wrangler?

There is a two-way approach to installing this audio receiver on Jeep Wrangler. One is by yourself, and the other is hiring a professional technician. Another factor that affects cost is the model of the Jeep wrangler where you will be installing it. Some models can cost you more compared with others.

If you do it by yourself, the cost will be much less. You can buy wirings and screw sets for around $100-$200, and the price of the ILX-W650 is around $300-$400. However, if you already got your hands on the additional tools, you do not have to buy new ones.

But, if you go hire a professional technician, you will need to add a labor cost which will be around $100-$250, depending on your location, along with the product cost. 


When you are looking for an excellent receiver for your Jeep Wrangler, there can be many choices. But, not every receiver performs up to the mark. 

However, the ILX-W650 from Alpine is among the top choices for Wrangler users. Nonetheless, installing it can seem difficult to you. So today, we discussed the complete step-by-step guide on installing an Alpine ILX W650 in a Jeep Wrangler. 

If you want to make your audio playing experience in the car more smooth, then ILX-W650 is a great choice. But, make sure to follow the steps properly to ensure a perfect installation. Nonetheless, if you find the installation process difficult, we suggest hiring a professional technician.

Related Posts: