The driver seat of your Jeep Cherokee is responsible for making spending hours on the road a more comfortable and enjoyable experience. But over time, the driver seating arrangement eventually turns uncomfortable, and you have to replace it. So, how much does it cost to replace the driver seat of the Jeep Cherokee?
One can get their replacement done at either $200 up to $750 or $500 up to $2,000 from any professional workshop.
Now, are you curious to learn more about this replacement task? No worries because I will cover them all in this very article-
Also, have a glance at the shortlisted Driver Seat choices, which are compatible for your Jeep Cherokee-
| Product Name | Material | Dimension | Weight (In Pounds) |
| Rugged Ridge 13445.37 Seat, High-Back, Front, Reclinable, Spice; 84-01 Jeep Cherokee XJ | Vinyl, Fabric | 50 x 22 x 9 inches | 38 |
| Rugged Ridge 13447.15 Sport Seat, Front, Reclinable, Black Denim | Vinyl | 50 x 22 x 9 inches | 39.6 |
| Rugged Ridge 13446.37 Ultra Seat, Front, Reclinable | Vinyl, Fabric | 50 x 22 x 9 inches | 9.9 |
| Rugged Ridge 13446.01 Ultra Seat, Front, Reclinable, Black | Vinyl, Fabric | 50 x 22 x 9 inches | 23.6 |
| Cipher Auto Racing Seats -Black Leatherette – Pair | Alloy Steel | 39.37 x 39.37 x 19.69 inches | 65 |
Jeep Cherokee Driver Seat Replacement Cost (Updated Price)
Remember, the replacement cost will surely vary depending on your preferred size, style, and material, as well as the local rate of the replacement task. It will also depend on the condition of your current driver’s seat arrangement.
Typically, the average driver seat replacement cost hangs, either between $200 and $750 or within $500 and $2000.
But if you wish to upgrade your driver seat arrangement with premium quality interior such as Katzkin leather, it will cost you approximately between $1,500 and $2,200.
The labor cost might hang between $106 and $134, but that will also vary depending on which service provide company or workshop you select and where the workshop’s location is.
For your better understanding, I have highlighted few popular Jeep Cherokee models and their driver/front or power seat cost estimations-
- 1999 Jeep Grand Cherokee Driver Seat – ($139.94 up to 324.99).
- 2004 Jeep Grand Cherokee Driver Seat – ($164.00 up to $704.98).
- 2008 Jeep Cherokee Driver Seat – ($196.33 up to $230.98).
- 2008-2010 Jeep Grand Cherokee Overland Leather Driver Seat Cover – ($209.00 up to $279.00).
- 2014-19 Jeep Grand Cherokee Driver Seat– ($175.00 up to $495.00)
When Should You Replace Your Jeep Cherokee Driver Seat?
Technically, the answer is that since each new driver seat lasts for a maximum of six years, and that’s the common standard for most available driver seats, so one should replace them after every 6 years.
But the seats of the Jeep Cherokee or any other branded vehicles might require replacement done before that time frame, which is also pretty normal.
Generally, one should decide on replacing their Jeep’s driver seat or power seats whenever they feel uncomfortable, notice ripping or cracking on your seat covers, or encounter difficulty adjusting the seating arrangement.
Since driver seats ensure ultimate comfort and safety of the driver during the journey when the seats start decomposing, one will surely feel or notice the difference.
Jeep Cherokee Driver Seat Installation Guide:
Once you have finally decided to replace your existing driver seat of your Jeep Cherokee after noticing any visible sign, it is time to learn what necessary tools you will need for the replacement task –
Required Tools-
- New Driver Seat
- Mechanical Tool Set
- Torx sockets (Only if you have Torx bolts on)
Now, follow the instructions step by step-
Step 1 – If your own a Jeep Cherokee model that has power seats, move your front seat all the way forward first and do not detach the battery yet. Move the front seat all the way forward.
Step 2 – Now, you need to locate the two bolts, which generally stay at the back of your driver’s chair. Remember, these bolts do not always stay exposed, and on some Jeep Cherokee models they are covered with plastic cover, so look closely at the end of your seat rails.
Step 3 – After locating the bolts successfully, carefully remove them and move your driver seat back again.
Step 4 – Next, you will find two bolts at the front of your driver seat rails so, remove them, and now you need to disconnect the battery.
Remember, when the key is in the ignition, and the battery is still connected, you should not disconnect the seat wires, or else it will immediately trigger the SRS warning light.
Step 5 – After that, you will need a helping hand to lift the driver’s seat and at the same time disconnect all the electrical cables while your front seat is still in a tilted back position.
Step 6 – Now, disconnect all the electrical wires and carefully remove the driver seat from your vehicle.
Step 7 – Once you have successfully removed the old one, it’s time to install the new one, and for that, all you have to do is follow the same direction in reverse order.
Note: The replacement procedures are pretty simple, so one can easily do it at own home garage, but if you are not familiar with such kind of repairing task, better to opt for professional help.
How To Detect When Your Jeep Cherokee Driver Seat Need Replacement?
You can get hints from the following obvious signs that you should replace the driver seat or else you might get injured due to bad seating conditions-
- Whenever you notice any visible crack or rip on your seat covers, it’s time for a replacement otherwise, the moisture will enter into your seat’s foam padding to deteriorate it.
- Another early sign that you should replace the seat is when you notice that your driver seat does not return to its original shape like before, or you feel like sinking into your seat while moving behind.
- You might feel the hardness of your seats that mainly happens when the padding fails to reactive or has fallen out, and that’s when you need replacement.
- If you encounter difficulty adjusting your driver seat or fail to lock the seat in a certain position even after several tries, that means you should change it.
Which One Is Better, Replacing or Repairing The Jeep Cherokee Driver Seat?
Whether you should replace or repair the seat, mainly that depends on the damage level of your driver seat.
For example, if your driver seat cover looks old or faded, you can simply re-dye it, and the problem will be solved. Also, this repair will not cost you much, and the cover will last for more couple of years.
But if you are having any major discomfort, such as having back or neck pain, soreness, or stiffness seating on that driver seat, that is a sign that you should replace it instead of repairing it.
Even if you notice that the seat has torn or ripped out very badly, the wiser choice will be replacing the existing one with a new pair.
The simple way to figure out which one will be more effective and convenient for you is to consider whether you have multiple issues on your seat or a single minor issue, which can be solved with minor repair.
Also, if you wish to upgrade your old seating arrangement with the latest premium option, you should choose the replacement, not the repairing option.
Conclusion
Just like other daily used sofa or chairs, the driver seat of any Jeep Cherokee model has a standard expiry duration. Even sometimes due to overuse or some unavoidable circumstances, you might have to replace it before the standard period.
But rather than considering the replacement cost, you should consider that a damaged seat can affect your and others’ safety on the road. So, make sure to replace it on time.
Related Posts:
