Skip to Content

How Much Does It Cost to Replace Jeep Frame? (Details)

You can no longer safely drive your car if your vehicle’s frame has been damaged. In most cases, external circumstances like a collision or anything similar impact frame damage.

It might cost anything from $5,000 to $35,000 to restore a Jeep’s frame. You may save money by doing it yourself or hiring a professional.

In this essay, we shed light on the expense of replacing the frame of a vehicle, especially a Jeep.

Jeep Frame Replacement Cost (Updated Price)

There is no one answer to this question. Whether we’re talking about the cost of repairing a Jeep frame or the frame of any other vehicle, the answer will always vary depending on the level of damage to the frame.

Some automobile frame damage issues may be repaired, but others necessitate the purchase of a new car frame. In the end, it all comes down to the damage.

Now, how much can you reasonably anticipate to pay? Even for little scratches in the quarter panels, you should expect to pay between $600 and $1,000 for minor damage repairs.

Keep in mind that this is only for the frame repair, and you’ll likely have to fork out extra money for the paint.

What if the frame is seriously damaged? Expect to pay around $10,000 for this service. The price may or may not include the price of painting, depending on the specifications.

About $900 per side would be required to repair a Jeep frame that has deteriorated only to the 1st rear bend of the lower rear bends.

Remember that these are simply averages and estimations. A local automobile frame shop is the best place to get a specific price estimate.

When Should You Replace Your Jeep Frame?

When your jeep frame is damaged you should replace it as soon as possible. We don’t advise you to do a self-inspection of your car.

An auto frame ship mechanic in your area should be able to examine it. They have a good eye for damage and can typically detect it quickly. Damaged frames can be identified by the following symptoms.

1. Jumbled frames:

The most common cause of mutilated frames is a collision, whether it’s a rear-end or head-on. The crumpled appearance of the injured region is a clear indication of damage.

2. Frames That Are Inextricably Twisted:

Car frames that twist and droop are obvious signs of deterioration. Because they’ll eat away at your tires and coils if left unchecked, they may seem inconsequential.

3. Harm to the sway:

It’s more common for rear-end or head-on crashes to cause mashed frames than corner impacts to cause sway damage. Your vehicle’s alignment will be thrown off if you sustain damage like this. In other words, it will favor one side over the other.

The presence of other issues, such as corrosion on the jeep frame as a result of environmental exposure, may indicate that the frame should be replaced.

Jeep Frame Installation Guide:

Because a frame replacement is a significant undertaking, it’s wise to arm yourself with as much information as possible before beginning.

For the most part, Jeep owners want to know if the frames of their vehicles can be swapped. It’s possible that you’ve found a terrific price on a Jeep frame that isn’t made specifically for your Jeep model.

There is no one-size-fits-all answer here. Even if you have the same Jeep model, the frame of your vehicle may not be interchangeable with any other Jeep model. A list of Jeep vehicles with interchangeable frames follows:

  • Frames from the 1987-1995 Jeep Wrangler (YJ) model range are interchangeable.
  • All Jeep Wrangler (TJ) frames from 1997 to 2002 are interchangeable.
  • It is possible to swap the frames on any Jeep Wrangler (TJ) from 2003 to 2006.

To install your new Jeep frame yourself, you’ll need a plenty of time. The job will take anywhere from 20 to 40 hours to complete.

Although a model-specific instruction is highly recommended, the following is a broad outline of the procedure:

  • Battery should be removed
  • Drain all fluids.
  • Disconnect everything that connects the body to the frame, including:
    • The steering shaft
    • Body mounts
    • Wiring harnesses
    • Hoses, brake lines, etc.
  • To remove the frame, lift the body.
  • Take off the wheels and tires.
  • Remove the engine and the drivetrain.
  • Put everything back together again on the new chassis

Is It Safe to Drive a Car with A Damaged Frame?

It all depends on the amount of the damage to the frame. As long as the vehicle travels in a straight route while you’re driving it, you should be able to operate it.

Even minor collisions can have a significant impact on the structural integrity of your jeep if it isn’t in peak condition.

What Is the Cost of Welding a Fractured Frame?

If you are determined to have your vehicle frame welded, expect to pay an average of $10,000, depending on the degree of the damage.

Some welders, however, may advise you to junk the car because a broken frame can be harmful for both the driver and other drivers on the road.

How Can I Tell If the Frame of My Jeep Is Bent?

There are few signs that frame of your vehicle is bent, and the alignment is off.

  • The wheels are misaligned, which is one of the key indicators of a bent frame.
  • Sideways Tracking of the Wheels A similar problem might occur with the wheels.
  • There is visible damage.
  • Components do not fit snugly.
  • Unusual Noises from the Engine.


The costs stated in this post are only estimates, and we’d like to emphasize that once more. If you want an accurate estimate, you’ll need to get your Jeep inspected by a mechanic. This knowledge is applicable to all type of vehicles, not just Jeeps.

Related Posts: