Skip to Content

How Much Does It Cost To Replace Jeep JK Shift Knob?

A broken or cranky shift knob can change the whole driving experience of your Jeep. It is difficult to use a broken shift knob. So, if you have a problem with your Jeep JK’s shift knob, how much will it cost to replace it?

Depending on where you buy it and which model you have, the shift knob can cost anywhere from $40 to $200 or more. The overall cost of a ball joint replacement will be between $150 and $250, or maybe more depending on other factors.

In this post, I’ll go over all there is to know about the Jeep JK gear knob. Continue reading to learn about the expected cost of the replacement project as well as the method.

Jeep JK Shift Knob Replacement Cost:

There are a few factors that help determine the approximate replacement cost of the shift knob of a Jeep JK.

In most cases, the shift knob itself will cost you from $40 to $200 (or more) and the labor cost will range from $100 to $150. 

However, this estimate will vary depending on various important factors such as the shift knob’s brand, material, and manufacturer.

Your Jeep model, production year, and preferred servicing business are all elements that go into the estimated cost.

I have shortlisted a few Jeep JK shift knobs and their prices:

When Should You Replace Your Jeep JK Shift Knob?

The shift knob can wear out, get damaged, or get stuck. If any of these happens, it is better to replace the shift knob.

Before you go for a replacement, make sure to check if it can be repaired. If it is repairable, it’s better to repair it rather than change it.

Is replacing a Shift Knob difficult?

Shift knob replacement is not a difficult job. There are a few simple step and anyone with some basic idea about tools and a knob can replace them.

However, if you do not have any idea about automotive or tools, it is recommended to go to a workshop and get it done by a professional.

How To Replace The Shift Knob of A Jeep Wrangler?

In a jeep or a vehicle with a manual transmission, the gear shift knob is the large plastic knob that attaches to the top of the gear shift lever.

To replace the shift knob, follow these steps-

Necessary tools for the replacement project

  • Ratchet
  • Screwdriver set

Step 1- Locate the gear shift knob, which is attached to the gear shift lever’s end. The majority of gear change knobs are placed in one of two ways. The knob will either screw into threads machined into the gear shift lever or be secured to the shift lever by a small screw (typically an Allen head screw) at the base of the knob.

Step 2- To remove the knob from the shift lever, turn it counterclockwise or remove the screw at the base of the knob.

Thread the replacement knob clockwise onto the shift lever or slide it onto the shift lever and tighten the screw to the knob’s base.

Some precautions to take:

First and foremost, safety! As a result, it’s best to apply the emergency brakes first. Of course, no one wants the car to shift or move by accident while they are trying to figure out how to repair the shift knob.

So, before you begin the procedure, make sure you apply the emergency brakes. Don’t forget to shift the vehicle into neutral after applying the emergency brake. This way, you’ll be able to exert more control over the gearshift as you go through the procedure.

Remove your original shift knob as the second step. In general, there are two approaches. The first method makes use of the knob’s built-in threading at the bottom. This threading can also be found inside the shifter.

To remove the knob, simply rotate it clockwise and you’re ready to go. The second method entails unscrewing the screw that secures the knob to the shifter.

This process can even be completed with the help of a wrench. This is how to remove the shift knob properly. Whichever approach you choose, be sure you don’t leave any loopholes in your system.

It’s time to install the new knob after successfully removing the old one from the gearshift. Regardless of how you removed the knob from the gearshift (by unscrewing or unthreading), the procedure for reinstalling it is the same.

Tighten the knob as much as possible to verify that it is properly positioned. Shift through the gears now to make sure the installation went smoothly.

It’s preferable to be certain about the knob’s placement so that it fits better when changing gears. So, for a better driving experience, use this wonderful how to alter shift knob method.


It’s inconvenient, annoying, and dangerous to drive with the wrong gearshift knob that keeps coming off.

Specialty gear shift knobs are available from a variety of aftermarket manufacturers. Exotic materials, such as calfskin and billet metal, are used in some of these. For owners who desire to personalize the interiors of their vehicles, some companies sell novelty gear shift knobs. As a result, it is preferable to replace a broken or damaged shift knob before it causes further harm.

Related Posts:

Leave a comment

Your email address will not be published. Required fields are marked *