The Trail Rated badge has established itself as a reliable indicator of a vehicle’s endurance and adaptability to any situation. The Jeep model is well-equipped for off-road driving. This is why they have a badge that says “Trail Rated.”
However, you can replace your jeep’s trail rated badge and use a customized or upgraded one. The price of trail rated badges is from around $12 to $70. Fun fact! you can replace your trail rated badge by yourself so it’s free from labor cost. You can also get it replaced by an expert.
In today’s article, we’ll talk about how much it’ll cost to replace your Jeep’s trail rated badge as well as other related facts. To learn more, continue reading.
Key Points:
- Trail Rated Badges are a component of the Jeep brand, and they signify the vehicle’s confidence in taking on any road obstacle.
- They can be replaced using a simple guideline.
Jeep Trail Rated Badge Replacement Cost (Updated Price)
Trail rated emblem are very easy to get, you can find them in any automobile shops, they are also available in many online platforms.
The price of a trail rated badge begins at $12.95 and can be up to $70.50 You must spend between $6 and $40 for a personalized symbol. It is possible to pay roughly $24.95 for badge glow.
Replacing trail rated emblem is not that costly. You can replace it by yourself!
Keep reading because we are going tell you how you can do that.
However, few people dislike the color or material of the badge, so, they put a personalized trail rating badge or their preferred customized badge on their automobile.
When Should You Replace Your Trail Rated Badge?
It is not necessary to replace your jeep’s trail graded badge at a specified period. You have the option to update it whenever you want.
Replacing your jeep’s trail rating is entirely up to you. If you want your jeep’s trail rated emblem to appear finer, you may do it.
Trail rated badges come in a variety of colors, styles, and sizes. So, choose the appropriate ones for your vehicle and get it replaced easily by following our installation guide stated below.
Trail Rated Badge Installation Guide:
The installation if trail badge installation is easy and takes very short time to replace. Some badges are made of LED light some of the badges are normal, a number of trails rated badge are available in the market
Trail Rated metal insignia, 4×4 in size. The diameter of this item is approximately 2-1/4 inches. With its adhesive-backed nameplate, installation is very easy.
Tools Required:
- Monofilament Line with a Drill Bit of 1/4″ (6mm)
- Adhesive remover
- Power drill
- Wire Connectors & Crimper
- Paint
Steps to install the trail rated badge:
- Remove the OEM badge or relocate the Badge Glow to a different spot.
- In order to get the best results, use a monofilament line (fishing line).
- Removing the OEM logo is as simple as pulling a monofilament thread behind it. A sawing motion may be required.
- Remove ANY and ALL adhesive or sticky tape that may have been left on the body from the OEM badge. A clean, dry surface is required in order for Badge Glow to adhere.
- Drill a 1/4-inch hole through the middle of the area where you intend to connect the Badge Glow “the body has a gaping hole
- Use finger nail polish or a little bit of paint to protect metal against corrosion. Make sure you just coat the drill bit’s raw metal.
- Removing the 3M tape cover on the back of the Badge Glow is necessary.
*Before adhering, make sure the badge is oriented correctly. It’s going to be difficult to remove after it’s been linked to the body.
- Press the Badge Glow to the body after feeding wire through the hole. Firm pressure is needed to ensure that the emblem is firmly attached.
- Connect your power supply via wires.
Why a Specific badge?
Jeeps have long been considered the gold standard of four-wheel-drive vehicles, thanks to their use in the military. When it came to 4×4 vehicles, Jeep was the only name you needed to know.
Of course, this is still true, but Jeep now manufactures a wide range of vehicles, some of which aren’t built for serious off-roading.
The Trail Rated label was created by Jeep to designate the vehicles that have extreme off-road capability because of this.
You can learn more about this badge on jeep’s official website https://www.jeep.com/
FAQs.
Are Trail Rated badges on both sides?
No, the badge is Only on one side.
Are Only Jeeps Trail Rated?
Aside from the Jeep Grand Cherokee and Grand Cherokee XJ and Grand Cherokee SRT8, there are no other cars on the road today that can claim to be “Trail Rated.”.
Where Is Jeeps Trail Rated?
The Rubicon Trail in the Sierra Nevada Mountains of California is where the Jeep Trail Rated Badge testing takes place. It contains some of the most difficult terrain for off-roading.
How much time it will take to install the trail rated batch?
Approximately it will take 15 to 20 minutes to install it. If you are doing it for the first time it may take few minutes more.
How do you remove Jeep Trail Rated badge?
It’s quite simple to remove. Peel the decal after heating it with a heat gun or hair dryer.
Conclusion
A jeep with a Trail certified insignia is capable of delivering excellent performance on all types of roads. However, you can always remove the badge and replace it with a personalized badge of your choice at any moment; it will only take a few minutes and a little amount of money.
Related Posts:
