How Much Does It Cost to Replace Jeep Wrangler Fender Flares

A patch will be tough to blend in because of the location of the fender flares. If a flare is broken or missing a piece, it may be time to replace it. But how much the replacement might cost you?

Depending on the model of your Jeep, replacing a fender flare might cost anywhere from $300 to $500.

Don’t worry if you’re wondering what additional factors go into calculating the replacement cost since I’ll cover all you need to know in this article.

Key points:

  • Replacement of a fender flare might cost anywhere from $300 to $500 depending on the type of your Jeep.
  • Most fender flares are made of tough plastic, they can crack in the event of a collision or prolonged use.
  • Remove your existing fender flares from your jeep by unbolting and removing them. And fix the new one.

Jeep Wrangler Fender Flares Replacement Cost

You must have appropriate facts or an overview of the projected expense before preparing or opting to replace the Jeep Wrangler Fender Flares.

I’ll explain and clarify every detail of this replacement project, including estimated charges, to aid you right now.

Depending on the model of jeep, the cost of replacing a fender flare could range from $300 to $500.

Fortunately, installation is straightforward and should take no more than 10 to 15 minutes each fender. You’ll be ready to rock in no time if you follow these simple steps.

Remove your present fender flares by unbolting them and removing them from the car.

If you go out and buy a pair of fender flares for your car, or conduct a quick web search, you’ll discover that there’s a lot to select from. The majority of fender flares are made for certain car models and, in some cases, model years.

To save you time and effort in determining which fender flares are best for you, we’ve compiled a list of leading brands along with some considerations to consider before purchasing.

Brand Features Cost
Smittybilt 76837 Fender Flares
  • Four fenders (2 pairs) included.
  • Made of 100% steel for durability.
$255.54
EAG Fender Flares with LED Amber Side Markers
  • Set fits all 2007 – 20018 Jeep Wrangler JKs. Both 2 door and 4 door models.
  • Textured black finish can be painted to match your jeep.
$309.99
Hooke Road Flat Fender Fares
  • Set of 2 pairs for both rear and front wheel wells
  • Specifically designed for Jeep JK 2007 to 2018 models
$159.99
Mopar Jeep Fender Flares – Factory Original
  • Made for Jeep 2018 and 2019 models
  • Comes as a set of 4 pieces
$143.28
U-Drive Textured Steel Fender Flares
  • Kit has 2 pairs of fender flares
  • Has a textured black power coating
$172.99
EAG Steel Fender Flare Kit (2018 -2019)
  • Kit with 2 pairs of fender flares for both front and rear
  • Streamlined design
$230.65

When Should You Replace Your jeep wrangler fender flares?

Your Jeep may kick up a lot of dust, gravel, water, and other stuff whether you’re peeling out or merely cruising down a dirt road.

Although most fender flares are composed of strong plastic, they can shatter if a collision occurs or if they are used for an extended period of time. A patch will be tough to blend in because of the location of the fender flares.

Fender flares are available in a range of styles, ranging from low-profile to large and prominent. The majority of Flares don’t require any cutting or drilling, and instead rely on pre-existing manufacturer holes to hold them.

Flares are less susceptible to damage and easier to clean than the rest of your Jeep’s body, so make sure they’re in good functioning order.

Broken flares are not only unsightly, but they also provide inadequate protection. A missing fender flare presents a risk of flying stones or other debris colliding with another car, which is bad.

This terrible tragedy can be avoided with a low-cost replacement fender flare.

Make sure you get the right fender flare for your Jeep. Because Jeeps have such a wide range of shapes, choosing the wrong flares can cause your replacement job to be delayed.

Jeep Wrangler Fender Flares Replacement Guideline:

Jeep fender flares are one-of-a-kind extension accessories. Some mount easily to the fender, while others require drilling holes into the vehicle’s body. They cover corrosion, provide style, and in some cases, meet legal requirements by fitting over the fender just over the wheels.

Flares of various colours, designs, and textures can be installed to give your car a fresh new look as long as you pick the proper fit.

I’ll show you how to install fender flares on your Jeep in this article.

Step 01: Positioning the Fender Flares

  • Remove existing flares from your vehicle
  • Purchase fender flares designed for your vehicle
  • Attach the flare trim to the flares via its adhesive backing
  • Connect the outer bolts to the fender flares.
  • Remove the screws from the bottom of the fender.
  • Remove support beam bolts from rear wheel wells.

Step 02: Drilling Fender Flare Holes

  • Mark the location of the bottom fender flare hole on the plastic bumper.
  • Draw a mark onto the position where the frame hole touches the fender flare.
  • Drill holes in the fender flare that align with your vehicle’s frame holes.

Step 03: Attaching Your Fender Flares

  • Attach the fender flare bracket with the provided hardware.
  • Reinstall the fender screws with a screwdriver.
  • Install plastic fasteners onto your flare if they are provided.

Is Your Jeep Wrangler Fender Flares Replacement Covered Under Insurance?

NO. Your jeep wrangler fender flares replacement is not covered under insurance.

The job of fender flares is, of course, aesthetics. The vehicle’s visual appeal is enhanced by these extras. Some are designed to give it a sleeker appearance, while others are designed to give it a rugged, aggressive appearance. This cost is always your responsibility.

The cost of replacement varies significantly depending on your location, the condition of your vehicle, and the service provider who will be attending you. You must bear all costs on your own.

Final Words

A Fender’s main purpose is to keep dirt and debris from being blown into the air by the tire.

Fender flares are available in a range of styles, ranging from low-profile to large and prominent. The majority of Flares don’t require any cutting or drilling, and instead rely on pre-existing manufacturer holes to hold them.

It is a low-cost replacement. Because most fender flares are constructed of plastic, they are readily scratched or cracked. You have the option to change it and customize it to your liking.

Related Posts: