Skip to Content

How to Handle Jeep Wrangler Oil Filter Housing Recall?

Oil is required for the correct operation of any vehicle, not only Jeep Wranglers, and it must meet specific standards. A Jeep Wrangler oil filter housing recall occurs only when a safety concern prevents your vehicle from starting.

The oil filter housing of the Jeep has a gasket, an oil filter, and a filter cover. These items are necessary to maintain your Jeep Wrangler’s engine oil pure and prevent this from spilling.

Leaking oil can cause serious issues; hence knowing about oil filter recall is essential. So, if you are a Jeep Wrangler user, read this article to learn more about the Jeep Wrangler Oil Filter Housing Recall.

What Does Jeep Wrangler Oil Filter Housing Recall Mean?

A Jeep wrangler oil filter housing recall means your Wrangler has a safety issue, and the vehicle can’t start. The National Highway Traffic Safety Administration (NHTSA) collaborates with manufacturers to record, monitor, & discuss recalls. 

When a producer or the National Highway Traffic Safety Administration deems that a vehicle, equipment, car seat, or tire poses an unacceptable risk of injury or lacks to satisfy minimum safety requirements, a recall is ordered.

If your vehicle is subject to a recall, the maker must inform you and repair the fault at no expense to consumers. They may process a refund, make repairs to the car, or, in exceptional situations, repurchase it.

How Do You Find Out If Jeep Wrangler Oil Filter Housing Has Recalled?

There are many different models of Jeep Wranglers, even though the oil filter housing recall is nearly the same in all of them. But, there can be slight differences. So we will talk about all the models from 2013 to 2017 of Wranglers.

The main way to find out why the oil filter housing has been recalled is to look for leaks in the oil filter. So, you will need to know the oil filter location in each of the models of the Jeep Wrangler.

2013 Jeep Wrangler:

In the 2013 Jeep Wrangler,  you can find the oil filter at the top of the engine just below the alternator. To discover it, you must first open the exhaust manifolds, which require no equipment. 

Move the entire top further by lifting the front corner to check if it has any leakage or broken gaskets. A common symptom that shows the engine has been recalled is excessive heat, poor oil pressure, or even foul emissions.

2014 Jeep Wrangler:

2014 wrangler oil filter housing is located just behind the alternator in the same location as it is in the 2013 Jeep Wrangler. Among Jeep Wrangler models, the 2014 Jeep Wrangler has the fewest recalls. However, if you notice anything wrong with the oil filter, you should inspect it for any problems.

2015 Jeep Wrangler:

A 2015 Jeep Wrangler oil filter housing recall might occur if the oil filter casing has become worn and damaged, causing the oil filter to leak. The oil filter is located on the upper side of the engine underneath the engine cover in the 2015 Jeep Wrangler.

2017 Jeep Wrangler:

The 2017 Jeep Wrangler may only be recalled if Jeep’s engineers identify a flaw in the vehicle and the oil filter is in the same area as the 2015 versions. 

2017 Jeep Wranglers are quite dependable, and oil filter housing recalls are uncommon. However, if you notice that your oil pressure is low and your car won’t start. The vehicle needs maintenance.

How To Handle Jeep Wrangler Oil Filter Housing Recall?

According to an oil filter housing recall, the issue is linked to the oil filter housing. The manufacturer will solve the problem, and the automobiles will be restored during the recall. If Jeep Wrangler makers consider a recall essential, you must also consider your safety, as this can be a severe issue. Hence you will need to maintain your oil filter housing on a routine basis.

What Should You Know If Jeep Wrangler Oil Filter Housing Recalled?

When the NHTSA discovers a production flaw in a vehicle, it is generally recalled. Vehicle owners can have their cars repaired. The carmaker will generally issue a letter to alert you of a recall. You will not be charged for the repair if you contact the manufacturer. 

However, if the oil filter housing is recalled as a result of poor maintenance or other factors on your part, you will need to fix it before driving it again on the road. The expense of changing the oil filter housing on any model of Jeep Wrangler is determined by a number of factors, including labor costs, repair places, and so on.

The cost to replace the oil filter assembly ranges from $180 to $700. Leaks caused by defective gaskets are one of the critical causes of the oil filter housing recall. The cost of replacing the oil filter housing gasket ranges from $150 to $300.

You will need to replace the whole oil filter housing when you see any cracks in them. Even if you see there is too much leak in the oil filter housing, it is beyond repair, and you should replace it with a new one. 

How Long Will It Take To Get The Jeep Wrangler Oil Filter Housing Recall Repaired?

If your oil housing in Jeep Wranglers has even a slight damage, it would almost certainly cause it to break or distort, causing oil to seep everywhere inside the hood. From our research, we have found two common reasons for this; regular wearing and strain and improper maintenance. 

However, repairing these damages isn’t tricky, and it only takes around 5-7 hours in a skilled vehicle repair shop.


Many factors can cause the Jeep Wrangler oil filter housing recalls. But, the main reason for any damage in the 2014 wrangler oil filter housing or any other model of Jeep Wrangler from 2013-to 2017 is improper maintenance.

However, wearing an aged oil filter can also cause them. If the recall is due to the manufacturer’s fault, you can send the car to them directly for free repair or even refunds in some cases. 

Nonetheless, if it is your fault, you will need to spend some money to fix it. Thus, we recommend you do regular maintenance and oil changes to avoid this trouble.

Related Posts: