Skip to Content

Replace Jeep Liberty Front Bumper: Cost and Step-by-Step Guide

Suppose you’re in your Jeep Liberty. What if the bumper has cracks and dents, or if the hooks have been damaged, causing the bumper to be unstable?

As a result, you’ll need to replace your bumper right now. A bumper replacement can cost anywhere from $ 885 to $1389, depending on the cost of the part and the amount of labor time necessary.

In this article, I’ll go over how much it costs to replace the front bumper on a Jeep Liberty, as well as some replacement techniques.

Key Points:

  • If the hooks on your Jeep Liberty bumper have been broken or have cracks and dents, you need to replace them.
  • Depending on the cost of the part and the amount of labor time required, a Jeep Liberty bumper replacement might cost anywhere from $885 to $1389.
  • Don’t be scared to file a claim with the other driver’s insurance company if you weren’t at fault. The majority of the time, insurance will cover all of your repairs.

What bumper does work for your Jeep Liberty?

The bumpers on your Jeep Liberty have a specific function: they protect the more important elements of your vehicle from damage.

In low-speed collisions, bumpers absorb a large portion of the impact and damage, leaving the rest of your car unharmed. Because they’re designed to break, you won’t have to worry about heavy bodily work.

However, even in mild collisions, bumpers can sustain serious damage.

When Should You Have a Bumper Replaced?

Car bumpers, like most other things, wear and tear with time, causing dents, fractures, and dings. Rust and corrosion are an issue that not only detracts from the overall appearance of your Jeep Liberty but also weakens the bumpers.

Check your bumpers for any of the above issues, and if you find any, it’s time to consider replacing them. This will not only give you peace of mind about the added safety of your Jeep Liberty, but it will also restore the appearance of your jeep.

How to Replace a Jeep Liberty Front Bumper

Bumper designs have evolved through time, with current bumpers being far easier to replace than their older counterparts, not only due to the less weight of today’s bumpers but also due to the way they are attached to your Jeep Liberty.

Unless the structure is destroyed, most cases merely require skin replacement. The steps for bumper replacement are as follows:

Step 1

  • Lift your Liberty’s hood and look for the six clips around the upper edge of the grille.
  • Roll the top of the grille forward after releasing all six of them.
  • To remove the grille of the Jeep, locate and detach the two retaining hooks beneath the headlights.

Step 2

  • With a Phillips screwdriver, locate the screw on the inboard edge of the front parking light assembly and remove it.
  • Pull the inboard edge of the assembly toward you, then slide it out of the bumper.
  • Remove the bulb socket’s locking tab, turn the socket counterclockwise, and slide it out of the assembly.

Step 3

  • Disconnect one of the two parking light assemblies from the Jeep and place it aside.
  • Remove the second assembly on the opposite side of the Jeep in the same manner.

Step 4

  • With a Phillips screwdriver, remove the bumper holding screws adjacent to the turn signal bulbs.
  • With a screwdriver, locate the two screws under the bottom of the bumper and remove them from the equation.

Step 5

  • Remove the three plastic rivets that hold the bumper to the splash shield in the wheelhouse.
  • With a flat screwdriver, pry them out.
  • Pull the bumper off the Jeep by releasing the three tabs at the top edge of the bumper fascia.

Step 6

  • To secure the top, install the new front bumper fascia on the Jeep and clasp the upper clips in place.
  • To fasten the bumper to the wheelhouse splash shield, insert the three plastic rivets into the holes along with the shield.

Step 7

  • With a screwdriver, tighten the two screws along the bottom of the bumper.
  • The two screws should be inserted on either side of the turn signals bulbs.
  • Tighten the screws with a Phillips screwdriver until they are secure, but not so tight that the plastic bumper material is cracked.

Step 8

  • In the front bumper, position the front marker light components. To secure the bulb socket in place, slide it into the assembly and turn it clockwise.
  • Use a Phillips screwdriver to tighten the screw along the inboard side of the assembly.
  • Place the grille on the Jeep’s front end, then secure the retaining hooks near the headlights.
  • Install the six retaining clips and slide the top of the grille into position.
  • Close the hood.

The Benefits of Bumper Replacement

Bumpers are designed not just to make automobiles look beautiful, but also to protect the remainder of your Jeep Liberty from damage in the event of a low-speed collision.

Scratches, dings, and dents are common in normal use, and corrosion and rust can also occur, all of which not only make your Jeep Liberty look ugly, but also weaken your bumper. So you may change your Jeep Liberty bumper.

Bumper replacement will also keep your car’s sleek, aerodynamic appearance, which will help it sell for a better price if you ever decide to sell it. In the case of a collision, it will also ensure that it is in the finest possible condition to protect you and your Jeep Liberty.

Jeep Liberty Bumper Replacement Cost Guide

For both form and function reasons, the majority of Jeep Libertys are equipped with a bumper.

Unfortunately, bumpers are frequently damaged while attempting to protect the rest of your Jeep Liberty. They may be patched and mended in many circumstances, but in extreme cases, the bumper will almost certainly need to be replaced entirely.

A bumper replacement typically costs between $ 885 and $ 1389, depending on the cost of the part and the amount of labor time required for the repair.

The cost of replacing the front bumper varies from the cost of replacing the rear bumper, and different manufacturers charge varying prices for the parts.

Does Insurance Cover Bumper Replacement?

If your front bumper has to be replaced, it was most likely damaged in a collision, whether you were at fault or not. Is it necessary to use your auto insurance? It depends on your circumstances as well as the expected cost of replacing the front bumper.

If you weren’t at fault for the collision, don’t be afraid to file a claim with the other driver’s insurance company.

In most cases, insurance will cover all of your repairs with no out-of-pocket costs or penalties. Repairs are usually guaranteed by several insurance companies. A front bumper, on the other hand, is rarely damaged due to the driver’s negligence.

Consider whether you want to utilize your insurance to cover the expense of the bumper repair if you’re at fault. You might not have a choice: if you don’t have collision insurance, you’ll be on the hook for any repairs you do yourself, with no aid from the insurance provider.

Even if you have collision coverage, submitting a claim could result in a future increase in your insurance premiums.

Final Words

It will simply take a few minutes and no special tools to replace a damaged front bumper on your Jeep Liberty sport utility vehicle (SUV).

Because the Liberty is built on a uni-frame construction, the genuine bumper is part of the frame, the bumper is nothing more than a cover or fascia.

The fascia is primarily decorative, and it is usually painted before being installed. To find available components for your Liberty, contact the dealer or a local salvage yard.

Related Posts:

Leave a comment

Your email address will not be published. Required fields are marked *