Skip to Content

How to Use a Floor Jack On a Jeep Wrangler? Guide

Isn’t the Jeep Wrangler a big one? What if you need to uplift your jeep for maintenance? Is this so easy?

If speed is of the essence, a floor jack’s quick lifting and lowering will not disappoint; several can lift a vehicle off the ground in under 10 pumps of the handle.

But how do you utilize this jack on the floor? Is your favorite Jeep Wrangler capable of being lifted by any floor jack? Is it simple to keep it in good condition?

This article will address all of your concerns.

How do Floor Jacks Work?

Floor jacks have two fixed wheels and two swiveling casters, unlike other types of jacks. As a result, they are extremely portable.

The jack is rolled till the saddle is beneath the lift point by the operator. The hydraulic cylinder lifts the lift arm until it makes contact with the car by pressing up and down on the handle.

The hydraulic cylinder is vertically positioned. It could be compared to a bottle jack that has fallen over.

What kind of jack does a Jeep Wrangler use?

The Arcan ALJ3T is the ideal jack for use in your Jeep Wrangler. It has a 3-ton capacity and a lift range of 3.75 to 18 inches.

Furthermore, if your Jeep has been lifted and has a lot of ground clearance, the CAT 240330 is the jack for you because it has a max lift height of nearly 30 inches.

How to use a floor Jack on a Jeep wrangler?

Step 01:

Because each car jack is unique, read the owner’s manual for your floor jack before continuing with these instructions.

Pay special attention to the section on safety, and always follow the directions for your specific product. Make sure your jack is capable of lifting the weight of your vehicle.

Step 02:

If you’re new to floor jacks, enlist some assistance. When using a jack, be sure you’re out of anyone else’s hearing range. Also, check sure no kids are playing around the vehicle.

Step 03:

Look for a level surface to work on. A garage is ideal, but a flat driveway or any other area that is level would satisfy.

Furthermore, it is often a good idea to use exclusively paved surfaces. Under the weight of the car, grass or soil surfaces can move, causing the jack to slip, which can be quite dangerous.

Step 04:

Chock the wheels after you’ve parked your car in the appropriate spot. Use bricks or heavy stones if you don’t have any proper wheel chocks.

Step 05:

Automotive jacks should only be used on the vehicle’s most durable and stable parts. Locate the most robust part of your vehicle and position the floor jack beneath it.

You should check the owner’s manual for this stage because specific instructions may be related to your model. Finding a sturdy part of your vehicle is important for avoiding car damage or sliding.

Step 06:

Slowly raise the car. This may entail pumping a handle or simply pressing a button, depending on the type of floor jacks you’re using.

Make careful to take it slowly and keep an eye on the vehicle to ensure everything is aligned properly. Do the same with your assistant.

Step 07:

Lower the jack gradually after you’ve completed your job on your vehicle.

Benefits of Floor Jacks

There are various benefits to using a good floor jack. It’s simple to use. For example, it provides tremendous lifting force with minimal effort to lift the vehicle off the ground.

Depending on the sort of floor jack used, any vehicle can be raised to an impressive height.

Jacks enable you to perform critical repairs and maintenance on your vehicle by elevating it high above the ground.

Floor jacks, in particular, are simple to move beneath and around the vehicle to lift it. Even when there is limited room, this provides jacking leverage.

Taking Care of Floor Jacks

Floor jacks should, on average, last for years; however, this is dependent on your maintenance culture and how well you care for them.

These are a few techniques to look after your floor jack.

Frequent Inspection

Regularly inspect your jack for fissures, loose bolts, and other dents that could diminish the jack’s liability.

Ensure that it is always clean

Grease, dust, and other pollutants are almost certain to come into contact with your jack. To maintain it clean, wipe it down with a damp towel regularly 

Replace the Oil

Even though the floor jack functions in a sealed container, it is still necessary to change the oil at regular intervals. The recommended oil change interval is listed in your jack’s operating handbook.


Before storing the jack cylinder, always release all of the pressure. Also, don’t put your jack away when it’s completely soaked. Rust will shorten the life of your jack if it is exposed to water.

Best Floor Jack for Jeep Wrangler

Don’t have the best floor jack for your Jeep Wrangler and want to jack it up? I have three suggestions for the best floor jack for a Jeep Wrangler.

Arcan ALJ3T

  • Arcan floor jack’s dual-piston feature allows it to lift to 6,000 pounds with just a few pumps.
  • To assure its strength, the aluminum jack incorporates a reinforced lift arm.
  • This jack has a foam bumper on its grip for comfortable pumping, making your task easier.

CAT 240330

  • For a lifted Jeep Wrangler, the Cat 240330 is the ideal floor jack.
  • The maximum height of this Cat floor jack is 29.25 inches (74.3 cm), making it ideal for raised Jeeps.
  • This high lift range enables you to easily reach the jack’s saddle to a high jack point beneath your jeep, allowing you to effortlessly elevate it and do maintenance or tire changes.

Blackhawk B6350

  • With the jack’s quick lifting technology, you can raise your Jeep Wrangler in just 3–4 pumps.
  • This jack is designed to elevate quickly even when there is no load on it, saving you time. This does not imply that the jack will require additional pumps to lift the jeep.
  • Because of its steel construction, this jack will last a long time. It also includes a safety valve and a vent plug for safe operation.

Final words

When it comes to servicing defects beneath the vehicle, floor jacks are an outstanding piece of equipment that mechanics and motorists rely on.

However, operating a floor jack safely without causing harm to yourself or your car necessitates a thorough understanding of the correct type to use, how to use it, and what safety precautions are recommended for safe use.

Related Posts: